Kawasaki Mule 610 4×4
2007 Kawasaki Muleâ„¢ 610 4×4 Specifications:
Engine: Four-stroke, air-cooled single
Displacement: 401cc
Bore x stroke: 82 x 76mm
Compression ratio: 8.6:1
Carburetor: Nikki 6C1026
Air filter: Snorkel-type with two-stage dry replaceable element
Oil filter: Automotive-type spin-on canister
Ignition: Magneto and transistor
Electrical: 12V DC, 14 amp-hour battery, alternator
Transmission: Continuously variable transmission with high and low range, plus reverse
Final drive: Shaft-driven selectable four-wheel drive, dual-mode rear differential
Exhaust: Muffler with USFS-approved spark arrestor
Front tires: 24×9-10 tubeless
Rear tires: 24×11-10 tubeless
Front suspension / wheel travel: MacPherson strut / 3.0 in.
Rear suspension / wheel travel: Unit swing axle / 3.1 in.
Steering: Rack and pinion
Brakes: Four-wheel hydraulic drums, triple sealed
Fuel capacity: 4.1 gal.
Dry weight: 979 lbs.
Overall length: 107.1 in.
Overall width: 52.6 in.
Overall height: 70.9 in.
Wheelbase: 70.0 in.
Ground clearance: 6.7 in.
Roll over protective structure (ROPS): This structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, and 7.5. This structure also meets FMVSS 216 Roof Crush resistance requirement .
Cargo bed dimensions (LxWxH): 41.1 x 35.4 x 9.6 in. / 10.9 cu. ft.
Load capacity: 926 lbs.
Cargo bed capacity: 400 lbs.
Towing capacity: 1,100 lbs.
Turning radius: 10.8 ft.
Top speed: 25 mph, governed
Instruments: Oil temperature meter, hour meter, gourd-style headlights, taillight and stoplight
Color choices: Woodsman Green or Aztec Red
* Price and specifications subject to change
